honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Starter Rebuild

Charging System, Wiring, Lighting
1941wld
honda305.com Member
Posts: 33
Joined: Sat Jun 26, 2010 9:02 am
Location: Baton Rouge, Louisiana

electric starter o-rings

Post by 1941wld » Sun Oct 29, 2017 11:33 am

Any body out there have the sizes or part numbers on the o-rings used inside the CB77 electric starters?

Thanks,

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: electric starter o-rings

Post by LOUD MOUSE » Sun Oct 29, 2017 1:00 pm

Where are they installed?. ..lm


1941wld wrote:Any body out there have the sizes or part numbers on the o-rings used inside the CB77 electric starters?

Thanks,

1941wld
honda305.com Member
Posts: 33
Joined: Sat Jun 26, 2010 9:02 am
Location: Baton Rouge, Louisiana

Post by 1941wld » Sun Oct 29, 2017 6:10 pm

inside the CB77 electric starters

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Sun Oct 29, 2017 6:23 pm

I rebuild those and can't thinkof a "O" ring.
More info?. ..........lm

1941wld wrote:inside the CB77 electric starters

1941wld
honda305.com Member
Posts: 33
Joined: Sat Jun 26, 2010 9:02 am
Location: Baton Rouge, Louisiana

o-ring

Post by 1941wld » Mon Oct 30, 2017 6:24 am

brush inspection port
planetary gear housing

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: o-ring

Post by LOUD MOUSE » Mon Oct 30, 2017 8:20 am

I don't damage the inspection one.
HONDA didn't offer it as a replaceable part.
I add paper tape to the inside of the cover.
Same for the really thin paper seal.
I use a thin rubber band there. .............lm

1941wld wrote:brush inspection port
planetary gear housing

1941wld
honda305.com Member
Posts: 33
Joined: Sat Jun 26, 2010 9:02 am
Location: Baton Rouge, Louisiana

o-rings

Post by 1941wld » Mon Oct 30, 2017 8:42 am

I've ordered a 60mm x 1mm o-ring for the planetary gear housing. It should squeeze down nicely. I'm going to measure the brush access port and find a new one that will work for it. I'll post my finding when finished.

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home