0.9 Pitch Screws

dkwilfert · Post by **dkwilfert** » Wed Jul 29, 2009 4:36 am

I'm trying to locate the 5x30 screws for the point cover and the 5x16 screws for the generator cover on my 63 CB77. Both of these locations have 0.9 pitch threads. I orderd a set of each from Western Hills Honda in Cincinnatti, but when the screws arrived they were all 0.8 pitch which I can easily find at the local hardware store.

Actually, if I can find the point cover screws (both mine have a slight bend about half way down) that would be sufficient because I only need 2 of the generator cover screws and I'll just cut off my 2 current point cover screws to fit that location.

e3steve · Post by **e3steve** » Wed Jul 29, 2009 5:55 am

PM 'FAST FRED' here on the forum; I got mine from him. He might just still have some.

G'luck!

gramey7 · Post by **gramey7** » Wed Jul 29, 2009 9:01 am

Contact Joseph Tubbs at icemanjat@hotmail.com I have bought old JIS threaded fasteners a few times.

dkwilfert · Post by **dkwilfert** » Wed Jul 29, 2009 7:03 pm

gramey7 wrote:Contact Joseph Tubbs at icemanjat@hotmail.com I have bought old JIS threaded fasteners a few times.

Thanks for the tip, I'll give it a try.

dkwilfert · Post by **dkwilfert** » Thu Jul 30, 2009 9:10 am

dkwilfert wrote:I'm trying to locate the 5x30 screws for the point cover and the 5x16 screws for the generator cover on my 63 CB77. Both of these locations have 0.9 pitch threads. I orderd a set of each from Western Hills Honda in Cincinnatti, but when the screws arrived they were all 0.8 pitch which I can easily find at the local hardware store.

Actually, if I can find the point cover screws (both mine have a slight bend about half way down) that would be sufficient because I only need 2 of the generator cover screws and I'll just cut off my 2 current point cover screws to fit that location.

No luck so far, still looking if someone can help.

FAST FRED · Post by **FAST FRED** » Thu Jul 30, 2009 11:24 am

I HAVE THE SCREWS YOU NEED. SEND ME A PM FOR DETAILS.

FAST FRED

Honda305.com Forum

honda305.com Forum

0.9 Pitch Screws

0.9 Pitch Screws

Re: 0.9 Pitch Screws

JIS SCREWS