66 CA77 Clutch Cable Issue

Kevmcp · Post by **Kevmcp** » Tue Apr 27, 2010 3:53 pm

Try emailing tim@Classichondarestorations.com

See what size they are, he has complete sets of all cables

brewsky · Post by **brewsky** » Tue Apr 27, 2010 4:04 pm

My local shop will make one up for $30.00 (no bend at lever)
Retrobikes shows them also here:
$20.00
http://www.olypen.com/retro/22870-272-010.htm

pwilke1 · Post by **pwilke1** » Tue Apr 27, 2010 4:40 pm

Thanks for the feed back. I should have plenty of options now!

-Patrick

joeweir1 · Post by **joeweir1** » Fri Apr 30, 2010 9:47 pm

I shortened my own and also 4shorts on this site did his own also.I had bought some on Ebay with the chrome elbow that were too long.

Eljeef · Post by **Eljeef** » Sun May 02, 2010 9:15 pm

I've noticed that some Dreams have the cable routed through the frame and behind the side cover to come out and go into the case further near the back. (like mine) I too ordered a cable that was correct to my serial number but when I got it, it was far too short. By pure chance I had won a side cover off of the Bay (mine had a broken screw flange ) that had the opening towards the centre and fit the routing of the new cable. (straight up and through the forks ). As long as the chrome elbow is about six inches I'd say the 53 inch goes for the hidden style cable and the 40 inch goes for the straight up and into the fork style, or is it up and through the gas tank. Can anybody clarify this? Regards, Jeff.

Kevmcp · Post by **Kevmcp** » Sun May 02, 2010 9:36 pm

How mine is mounted, and it is original

joeweir1 · Post by **joeweir1** » Mon May 03, 2010 3:22 pm

I route mine along the frame under the tank.Also, are your tank badges on the wrong way?

Honda305.com Forum

66 CA77 Clutch Cable Issue

cables

that's