Looking for Bikes, Parts, Etc.? Post it here or try the New Honda305.com Auctions !!!
-
Iownyouto
- honda305.com Member
- Posts: 4
- Joined: Mon Jun 13, 2011 12:48 am
Post
by Iownyouto » Wed Jun 15, 2011 1:10 am
Im looking for both front and back fenders (previous owner cut originals) carb bottom bowl, levers, alt cover and Ignition points cover. Let me know if you have any of these if not eBay it is then.
-
Wilf
- honda305.com Member
- Posts: 395
- Joined: Thu Jan 22, 2009 10:32 am
- Location: Gibsons, BC Canada
Post
by Wilf » Wed Jun 15, 2011 8:06 am
I have a spare points cover and alternator cover...PM if you're interested.
Wilf
Last edited by
Wilf on Wed Jun 15, 2011 9:12 am, edited 1 time in total.
-
OldStan
- honda305.com Member
- Posts: 548
- Joined: Wed Jul 14, 2010 5:33 pm
- Location: Galt, California
Post
by OldStan » Wed Jun 15, 2011 9:06 am
FYI, rear fender is part of the frame on these bikes. That said, there are usually frames on eBay, although shipping might be a pain.
63 CA78
-
mike1969
- honda305.com Member
- Posts: 720
- Joined: Sat Feb 06, 2010 6:53 pm
- Location: w.pa.
Post
by mike1969 » Wed Jun 15, 2011 9:29 am
The rear section of the Dream fender can be removed by drilling out the spot welds and can be replaced using small nuts and bolts or pop rivets. I did it on my 66 Dream.
-
Iownyouto
- honda305.com Member
- Posts: 4
- Joined: Mon Jun 13, 2011 12:48 am
Post
by Iownyouto » Wed Jun 15, 2011 9:29 am
I know it's a part of the frame but if you got a parts bike you can take a grinder to it.
-
OldStan
- honda305.com Member
- Posts: 548
- Joined: Wed Jul 14, 2010 5:33 pm
- Location: Galt, California
Post
by OldStan » Wed Jun 15, 2011 9:38 am
The rear section of the Dream fender can be removed by drilling out the spot welds and can be replaced using small nuts and bolts or pop rivets. I did it on my 66 Dream.
Good to know. My rear fender has a crack (normal I understand) that was poorly repaired. If I can't do a decent job of repairing the "repair" I might consider that route myself.
63 CA78
-
mike1969
- honda305.com Member
- Posts: 720
- Joined: Sat Feb 06, 2010 6:53 pm
- Location: w.pa.
Post
by mike1969 » Wed Jun 15, 2011 11:48 am
Stan,All of the spot welds are hidden behind the fender struts except the 2 on the top of the fender under the seat. I put 2 chrome bolts and nuts there even though they can't be seen with the seat on.