petcock kit

Rogermeiner · Post by **Rogermeiner** » Mon Feb 18, 2008 12:15 pm

is there a source for the inners of my Dream fuel shutoff ? Itis in great shape but the cork and rubber parts do not seat tight. Thanks for any hints for a source

305 · Post by **305** » Mon Feb 18, 2008 12:46 pm

i see rebuild kits for them on ebay all the time. i rebuilt mine about 10 years ago with a kit from Ohio Cycle

here they are: http://www.ohiocycle.com/

Hahnda · Post by **Hahnda** » Mon Feb 18, 2008 1:58 pm

http://www.olypen.com/retro/

3BeanCrispy · Post by **3BeanCrispy** » Fri May 02, 2008 5:20 pm

is the flat rubber inner piece as good as the old cork? or did i buy a cheezy kit ...

joeweir1 · Post by **joeweir1** » Fri May 02, 2008 10:54 pm

I bought the rebuild kit from Ebay and had trouble with it being too hard to open and close.It was so hard to move the high level tube broke where the metal goes to the rubber due to it flexing everytime I opened and closed the petcock.I've read some people putting some sort of grease in it to help it slide.Metal sandwiched between rubber does not want to move well.They sent me a new kit free.Not sure what I could have done to make it work any easier?I just put a mower shut-off in line now and leave it on reserve all the time.Petcock does not leak which I'm happy with.

Honda305.com Forum

honda305.com Forum

petcock kit

petcock kit